Digital Multifunction Process Calibrator / Multimeter with High Resolution
Quick Details
DCA Measure Range : 0-24mA Loop Current
DCV Measure Range : 0--10V
Loop Power : 24V
Display : mA and Percentage Display
Description
HDS7218 Volt/mA Calibrator is a source and measurement tool. This Calibrator is use to measure or output 0 to 24 mA DC current loop, and 0 to 10 V DC voltage. And it is also can measure the temperature and Humidity ,what's more ,it can be charged with Battery ,but also can be charge by USB
HDS7218 Volt/mA Calibrator include this accessories : Holster, a pair of Test Leads, 9V battery, USB Line and this manual.
If the calibrator is broken or short of some accessories, please contact us any times
General Specifications
- Maximum voltage applied between any jack and earth
- ground or between any tow jack :30V
- Storage temperature :-40℃～60℃
- Operating temperature:-10℃～55℃
- Operating altitude :3000 meters maximum
- Temperature coefficient :±0.005% of range per ℃
- for the temperature range -10 to 18 ℃ ℃ and 28 to 55 ℃ ℃
- Relative humidity :95% up to 30℃,
75% up to 40℃,
45% up to 50℃,
35% up to 55℃
- Shock :Random 2g , 5Hz to 500Hz
- Safety :1 meter drop test
- Power supply :Built-in 1100 mAh rechargeable lithium polymer battery
- Standard accessories:test lead ,USB line
- Meter size : 200mm×110mm×45mm
Advantage
Charge management
Instrument is charging through the USB interface, can be connected to the computer, Mobile phone chargers, etc which the voltage is DC5V and output current is 1.0 A to recharge 2-3 hours can be fully charged, When charging ,it will show “Red Light”,After charging is completed,it will show “Green Light”
Please charge the calibrator at least once two months,otherwise it will reduce the lifetime of battery
|
|
Digital Multifunction Process Calibrator / Multimeter with High Resolution Images
|
